Adjusting and Measurement of Miniature bearing---TIC BEARINGS
During operation, the bearing requires correct relubrication to perfect its performance. Miniature lubrication methods are divided into grease and oil lubrication. In order make function well, first of all, we must choose a method suitable for use ...Read More >>
What are the necessary requirements of bearing material?
The rings and rolling elements of bearings are repeatedly subjected to high contact pressures, at the same time they carry out with sliding. What about retainer? One side is in sliding two sides ring element, or one side, other bears tensile force compressive ...Read More >>
How can a precision bearings be made perfectly?
In order to ensure that the bearing does not produce excessive deformation after installation, it must be: (1) The roundness of shaft and seat hole verticality shoulder should be required in accordance with corresponding accuracy ...Read More >>
Focus on the installation of high -precision Bearing
High-speed precision bearings are mainly used in high-speed rotating occasions with light loads. They require high precision, speed, low temperature rise and vibration a certain service life. It is often as the supporting parts of electric spindle to be ...Read More >>
TIC tells you how to clean and disinfect dental handpieces?
The surface of the used Dental Handpiece may also be stained with adhesives or dental filling materials after using. These residual substances should removed firstly. TIC Bearing tells you correct steps for cleaning and disinfecting handpieces!1. Step on ...Read More >>
Have you ever confused by not knowing about the bearing Accuracy?
Tic-Techs shares the tips :The accuracy of rolling bearings is divided into (mainly) dimensional and rotation accuracy. The level has been standardized, six levels: 0, 6X, 6, 5, 4, 2.The increased from which sufficient for general purpose but when used in ...Read More >>
Machining allowance method for precision mechanical workpiece--TIC
The machining allowance of precision mechanical workpieces can become the blank allowance, which refers to difference between size and design part drawing. Under normal circumstances, we understand it as thickness metal layer cut on surface workpiece ...Read More >>